Everything you ever wanted to know about the Seoul Metro System but were too afraid to ask

Gwanghwamoon subway station on line 5 in Seoul, 2010. Image: Getty.

Seoul’s metro system carries 7m passengers a day across 1,000 miles of track. The system is as much a regional commuter railway as an urban subway system. Without technically leaving the network, one can travel from Asan over 50 miles to the south of central Seoul, all the way up to the North Korean border 20 miles north of the city.

Fares are incredibly low for a developed country. A basic fare of 1,250 won (about £1) will allow you to travel 10km; it’s only an extra 100 won (about 7p) to travel every additional 5km on most lines.

The trains are reasonably quick: maximum speeds of 62mph and average operating speeds of around 20mph make them comparable to London Underground. But the trains are much more spacious, air conditioned and have wi-fi access. Every station also has protective fences, between platform and track, to prevent suicides and accidents.

The network

The  service has a complex system of ownership and operation. The Seoul Metro Company (owned by Seoul City council) operates lines 5-8 on its own, but lines 1-4 are operated jointly with Korail, the state-owned national rail company. Meanwhile, Line 9 is operated jointly between Trans-Dev (a French company which operates many buses in northern England) and RATP (The Parisian version of TfL).

Then there’s Neotrans, owned by the Korean conglomerate Doosan, which owns and operates the driverless Sinbundang line. The Incheon city government, which borders Seoul to the west, owns and operates Incheon Line 1 and Line 2.

The Airport Express was originally built and owned by a corporation jointly owned by 11 large Korean firms, but is now mostly owned by Korail. The Uijeongbu light railway is currently being taken over by the Uijeongbu city council (that one’s north of Seoul) after the operating company went bankrupt. And the Everline people mover is operated by a joint venture owned by Bombardier and a variety of Korean companies.

Seoul’s subway map. Click to expand. Image: Wikimedia Commons.

The rest of the lines are operated by the national rail operator Korail. The fare structure is either identical or very similar for all of these lines. All buses and trains in the region are accessible with a T-money card, similar to London’s Oyster card. Fares are collected centrally and then distributed back to operators based on levels of usage.

Funding

The Korean government spends around £27bn on transport every year: that works out at 10 per cent more per person than the British government spends.  The Seoul subway’s annual loss of around £200m is covered by this budget.

The main reason the loss is much lower than TfL’s £458m is that, despite Seoul’s lower fares, it also has much lower maintenance costs. The oldest line, Line 1 is only 44 years old.


Higher levels of automation and lower crime rates also mean there are fewer staff. Workers pay is also lower: a newly qualified driver will be paid around £27,000 a year compared to £49,000 in London.

New infrastructure is paid for by central government. However, investment in the capital does not cause the same regional rivalries as it does in the UK for a variety of reasons. Firstly, investment is not so heavily concentrated in the capital. Five other cities have subways; the second city of Busan has an extensive five-line network.

What’s more, while investment is still skewed towards Seoul, it’s a much bigger city than London, and South Korea is physically a much smaller country than the UK (about the size of Scotland and Wales combined). Some 40 per cent of the national population lives on the Seoul network – and everyone else who lives on the mainland can be in Seoul within 3 hours.

Finally, politically the biggest divide in South Korea is between the south-west and the south-east (the recently ousted President Park Geun-Hye won just 11 per cent of the vote in the south west, while winning 69 per cent in the south-east). Seoul is seen as neutral territory.  

Problems

A driverless train on the Shinbundang Line. Image: Wikicommons.

The system is far from perfect. Seoul’s network is highly radial. It’s incredibly cheap and easy to travel from outer lying areas to the centre, and around the centre itself. But travelling from one of Seoul’s satellite cities to another by public transport is often difficult. A journey from central Goyang (population: 1m) to central Incheon (population: 3m) is around 30 minutes by car. By public transport, it takes around 2 hours. There is no real equivalent of the London Overground.

There is also a lack of fast commuter services. The four-track Seoul Line 1 offers express services to Incheon and Cheonan, and some commuter towns south of the city are covered by intercity services. But most large cities of hundreds of thousands of people within commuting distance (places comparable to Reading or Milton Keynes) are reliant on the subway network, and do not have a fast rail link that takes commuters directly to the city centre.

This is changing however with the construction of a system modelled on the Paris RER and London’s Crossrail. The GTX will operate at maximum speed of 110Mph. The first line (of three planned) is scheduled to open in 2023, and will extend from the new town of Ilsan on the North Korean border to the new town of Dongtan about 25km south of the city centre.

The system will stop much less regularly than Crossrail or the RER resulting in drastic cuts in journey times. For example, the time from llsan to Gangnam (of Gangnam Style fame) will be cut from around 1hr30 to just 17 minutes. When the three-line network is complete most of the major cities in the region will have a direct fast link to Seoul Station, the focal point of the GTX as well as the national rail network. A very good public transport network is going to get even better.

 
 
 
 

To build its emerging “megaregions”, the USA should turn to trains

Under construction: high speed rail in California. Image: Getty.

An extract from “Designing the Megaregion: Meeting Urban Challenges at a New Scale”, out now from Island Press.

A regional transportation system does not become balanced until all its parts are operating effectively. Highways, arterial streets, and local streets are essential, and every megaregion has them, although there is often a big backlog of needed repairs, especially for bridges. Airports for long-distance travel are also recognized as essential, and there are major airports in all the evolving megaregions. Both highways and airports are overloaded at peak periods in the megaregions because of gaps in the rest of the transportation system. Predictions for 2040, when the megaregions will be far more developed than they are today, show that there will be much worse traffic congestion and more airport delays.

What is needed to create a better balance? Passenger rail service that is fast enough to be competitive with driving and with some short airplane trips, commuter rail to major employment centers to take some travelers off highways, and improved local transit systems, especially those that make use of exclusive transit rights-of-way, again to reduce the number of cars on highways and arterial roads. Bicycle paths, sidewalks, and pedestrian paths are also important for reducing car trips in neighborhoods and business centers.

Implementing “fast enough” passenger rail

Long-distance Amtrak trains and commuter rail on conventional, unelectrified tracks are powered by diesel locomotives that can attain a maximum permitted speed of 79 miles per hour, which works out to average operating speeds of 30 to 50 miles per hour. At these speeds, trains are not competitive with driving or even short airline flights.

Trains that can attain 110 miles per hour and can operate at average speeds of 70 miles per hour are fast enough to help balance transportation in megaregions. A trip that takes two to three hours by rail can be competitive with a one-hour flight because of the need to allow an hour and a half or more to get to the boarding area through security, plus the time needed to pick up checked baggage. A two-to-three-hour train trip can be competitive with driving when the distance between destinations is more than two hundred miles – particularly for business travelers who want to sit and work on the train. Of course, the trains also have to be frequent enough, and the traveler’s destination needs to be easily reachable from a train station.

An important factor in reaching higher railway speeds is the recent federal law requiring all trains to have a positive train control safety system, where automated devices manage train separation to avoid collisions, as well as to prevent excessive speeds and deal with track repairs and other temporary situations. What are called high-speed trains in the United States, averaging 70 miles per hour, need gate controls at grade crossings, upgraded tracks, and trains with tilt technology – as on the Acela trains – to permit faster speeds around curves. The Virgin Trains in Florida have diesel-electric locomotives with an electrical generator on board that drives the train but is powered by a diesel engine. 

The faster the train needs to operate, the larger, and heavier, these diesel-electric locomotives have to be, setting an effective speed limit on this technology. The faster speeds possible on the portion of Amtrak’s Acela service north of New Haven, Connecticut, came after the entire line was electrified, as engines that get their power from lines along the track can be smaller and much lighter, and thus go faster. Catenary or third-rail electric trains, like Amtrak’s Acela, can attain speeds of 150 miles per hour, but only a few portions of the tracks now permit this, and average operating speeds are much lower.

Possible alternatives to fast enough trains

True electric high-speed rail can attain maximum operating speeds of 150 to 220 miles per hour, with average operating speeds from 120 to 200 miles per hour. These trains need their own grade-separated track structure, which means new alignments, which are expensive to build. In some places the property-acquisition problem may make a new alignment impossible, unless tunnels are used. True high speeds may be attained by the proposed Texas Central train from Dallas to Houston, and on some portions of the California High-Speed Rail line, should it ever be completed. All of the California line is to be electrified, but some sections will be conventional tracks so that average operating speeds will be lower.


Maglev technology is sometimes mentioned as the ultimate solution to attaining high-speed rail travel. A maglev train travels just above a guideway using magnetic levitation and is propelled by electromagnetic energy. There is an operating maglev train connecting the center of Shanghai to its Pudong International Airport. It can reach a top speed of 267 miles per hour, although its average speed is much lower, as the distance is short and most of the trip is spent getting up to speed or decelerating. The Chinese government has not, so far, used this technology in any other application while building a national system of long-distance, high-speed electric trains. However, there has been a recent announcement of a proposed Chinese maglev train that can attain speeds of 375 miles per hour.

The Hyperloop is a proposed technology that would, in theory, permit passenger trains to travel through large tubes from which all air has been evacuated, and would be even faster than today’s highest-speed trains. Elon Musk has formed a company to develop this virtually frictionless mode of travel, which would have speeds to make it competitive with medium- and even long-distance airplane travel. However, the Hyperloop technology is not yet ready to be applied to real travel situations, and the infrastructure to support it, whether an elevated system or a tunnel, will have all the problems of building conventional high-speed rail on separate guideways, and will also be even more expensive, as a tube has to be constructed as well as the train.

Megaregions need fast enough trains now

Even if new technology someday creates long-distance passenger trains with travel times competitive with airplanes, passenger traffic will still benefit from upgrading rail service to fast-enough trains for many of the trips within a megaregion, now and in the future. States already have the responsibility of financing passenger trains in megaregion rail corridors. Section 209 of the federal Passenger Rail Investment and Improvement Act of 2008 requires states to pay 85 percent of operating costs for all Amtrak routes of less than 750 miles (the legislation exempts the Northeast Corridor) as well as capital maintenance costs of the Amtrak equipment they use, plus support costs for such programs as safety and marketing. 

California’s Caltrans and Capitol Corridor Joint Powers Authority, Connecticut, Indiana, Illinois, Maine’s Northern New England Passenger Rail Authority, Massachusetts, Michigan, Missouri, New York, North Carolina, Oklahoma, Oregon, Pennsylvania, Texas, Vermont, Virginia, Washington, and Wisconsin all have agreements with Amtrak to operate their state corridor services. Amtrak has agreements with the freight railroads that own the tracks, and by law, its operations have priority over freight trains.

At present it appears that upgrading these corridor services to fast-enough trains will also be primarily the responsibility of the states, although they may be able to receive federal grants and loans. The track improvements being financed by the State of Michigan are an example of the way a state can take control over rail service. These tracks will eventually be part of 110-mile-per-hour service between Chicago and Detroit, with commitments from not just Michigan but also Illinois and Indiana. Fast-enough service between Chicago and Detroit could become a major organizer in an evolving megaregion, with stops at key cities along the way, including Kalamazoo, Battle Creek, and Ann Arbor. 

Cooperation among states for faster train service requires formal agreements, in this case, the Midwest Interstate Passenger Rail Compact. The participants are Illinois, Indiana, Kansas, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio, and Wisconsin. There is also an advocacy organization to support the objectives of the compact, the Midwest Interstate Passenger Rail Commission.

States could, in future, reach operating agreements with a private company such as Virgin Trains USA, but the private company would have to negotiate its own agreement with the freight railroads, and also negotiate its own dispatching priorities. Virgin Trains says in its prospectus that it can finance track improvements itself. If the Virgin Trains service in Florida proves to be profitable, it could lead to other private investments in fast-enough trains.

Jonathan Barnett is an emeritus Professor of Practice in City and Regional Planning, and former director of the Urban Design Program, at the University of Pennsylvania. 

This is an extract from “Designing the Megaregion: Meeting Urban Challenges at a New Scale”, published now by Island Press. You can find out more here.