As EU funding is lost, “levelling up” needs investment, not just rhetoric

Oh, well. Image: Getty.

Regional inequality was the foundation of Boris Johnson’s election victory and has since become one of the main focuses of his government. However, the enthusiasm of ministers championing the “levelling up” agenda rings hollow when compared with their inertia in preparing a UK replacement for European structural funding. 

Local government, already bearing the brunt of severe funding cuts, relies on European funding to support projects that boost growth in struggling local economies and help people build skills and find secure work. Now that the UK has withdrawn its EU membership, councils’ concerns over how EU funds will be replaced from 2021 are becoming more pronounced.

Johnson’s government has committed to create a domestic structural funding programme, the UK Shared Prosperity Fund (UKSPF), to replace the European Structural and Investment Fund (ESIF). However, other than pledging that UKSPF will “reduce inequalities between communities”, it has offered few details on how funds will be allocated. A public consultation on UKSPF promised by May’s government in 2018 has yet to materialise.

The government’s continued silence on UKSPF is generating a growing sense of unease among councils, especially after the failure of successive governments to prioritise investment in regional development. Indeed, inequalities within the UK have been allowed to grow so much that the UK’s poorest region by EU standards (West Wales & the Valleys) has a GDP of 68 per cent of the average EU GDP, while the UK’s richest region (Inner London) has a GDP of 614 per cent of the EU average – an intra-national disparity that is unique in Europe. If the UK had remained a member of the EU, its number of ‘less developed’ regions in need of most structural funding support would have increased from two to five in 2021-27: South Yorkshire, Tees Valley & Durham and Lincolnshire joining Cornwall & Isles of Scilly and West Wales & the Valley. Ministers have not given guarantees that any region, whether ‘less developed’ or otherwise, will obtain the same amount of funding under UKSPF to which they would have been entitled under ESIF.


The government is reportedly contemplating changing the Treasury’s fiscal rules so public spending favours programmes that reduce regional inequalities as well as provide value for money, but this alone will not rebalance the economy. A shared prosperity fund like UKSPF has the potential to be the master key that unlocks inclusive growth throughout the country, particularly if it involves less bureaucracy than ESIF and aligns funding more effectively with the priorities of local people. 

In NLGN’s Community Commissioning report, we recommended that this funding should be devolved to communities directly to decide local priorities for the investment. By enabling community ownership of design and administration, the UK government would create an innovative domestic structural funding scheme that promotes inclusion in its process as well as its outcomes.

NLGN’s latest report, Cultivating Local Inclusive Growth: In Practice, highlights the range of policy levers and resources that councils can use to promote inclusive growth in their area. It demonstrates that, through collaboration with communities and cross-sector partners, councils are already doing sterling work to enhance economic and social inclusion. Their efforts could be further enhanced with a fund that learns lessons from ESIF’s successes and flaws: a UKSPF that is easier to access, designed and delivered by local communities, properly funded, and specifically targeted at promoting social and economic inclusion in regions that need it most. “Getting Brexit done” was meant to free up the government’s time to focus once more on pressing domestic priorities. “Getting inclusive growth done” should be at the top of any new to-do list.

Charlotte Morgan is senior researcher at the New Local Government Network.

 
 
 
 

To build its emerging “megaregions”, the USA should turn to trains

Under construction: high speed rail in California. Image: Getty.

An extract from “Designing the Megaregion: Meeting Urban Challenges at a New Scale”, out now from Island Press.

A regional transportation system does not become balanced until all its parts are operating effectively. Highways, arterial streets, and local streets are essential, and every megaregion has them, although there is often a big backlog of needed repairs, especially for bridges. Airports for long-distance travel are also recognized as essential, and there are major airports in all the evolving megaregions. Both highways and airports are overloaded at peak periods in the megaregions because of gaps in the rest of the transportation system. Predictions for 2040, when the megaregions will be far more developed than they are today, show that there will be much worse traffic congestion and more airport delays.

What is needed to create a better balance? Passenger rail service that is fast enough to be competitive with driving and with some short airplane trips, commuter rail to major employment centers to take some travelers off highways, and improved local transit systems, especially those that make use of exclusive transit rights-of-way, again to reduce the number of cars on highways and arterial roads. Bicycle paths, sidewalks, and pedestrian paths are also important for reducing car trips in neighborhoods and business centers.

Implementing “fast enough” passenger rail

Long-distance Amtrak trains and commuter rail on conventional, unelectrified tracks are powered by diesel locomotives that can attain a maximum permitted speed of 79 miles per hour, which works out to average operating speeds of 30 to 50 miles per hour. At these speeds, trains are not competitive with driving or even short airline flights.

Trains that can attain 110 miles per hour and can operate at average speeds of 70 miles per hour are fast enough to help balance transportation in megaregions. A trip that takes two to three hours by rail can be competitive with a one-hour flight because of the need to allow an hour and a half or more to get to the boarding area through security, plus the time needed to pick up checked baggage. A two-to-three-hour train trip can be competitive with driving when the distance between destinations is more than two hundred miles – particularly for business travelers who want to sit and work on the train. Of course, the trains also have to be frequent enough, and the traveler’s destination needs to be easily reachable from a train station.

An important factor in reaching higher railway speeds is the recent federal law requiring all trains to have a positive train control safety system, where automated devices manage train separation to avoid collisions, as well as to prevent excessive speeds and deal with track repairs and other temporary situations. What are called high-speed trains in the United States, averaging 70 miles per hour, need gate controls at grade crossings, upgraded tracks, and trains with tilt technology – as on the Acela trains – to permit faster speeds around curves. The Virgin Trains in Florida have diesel-electric locomotives with an electrical generator on board that drives the train but is powered by a diesel engine. 

The faster the train needs to operate, the larger, and heavier, these diesel-electric locomotives have to be, setting an effective speed limit on this technology. The faster speeds possible on the portion of Amtrak’s Acela service north of New Haven, Connecticut, came after the entire line was electrified, as engines that get their power from lines along the track can be smaller and much lighter, and thus go faster. Catenary or third-rail electric trains, like Amtrak’s Acela, can attain speeds of 150 miles per hour, but only a few portions of the tracks now permit this, and average operating speeds are much lower.

Possible alternatives to fast enough trains

True electric high-speed rail can attain maximum operating speeds of 150 to 220 miles per hour, with average operating speeds from 120 to 200 miles per hour. These trains need their own grade-separated track structure, which means new alignments, which are expensive to build. In some places the property-acquisition problem may make a new alignment impossible, unless tunnels are used. True high speeds may be attained by the proposed Texas Central train from Dallas to Houston, and on some portions of the California High-Speed Rail line, should it ever be completed. All of the California line is to be electrified, but some sections will be conventional tracks so that average operating speeds will be lower.


Maglev technology is sometimes mentioned as the ultimate solution to attaining high-speed rail travel. A maglev train travels just above a guideway using magnetic levitation and is propelled by electromagnetic energy. There is an operating maglev train connecting the center of Shanghai to its Pudong International Airport. It can reach a top speed of 267 miles per hour, although its average speed is much lower, as the distance is short and most of the trip is spent getting up to speed or decelerating. The Chinese government has not, so far, used this technology in any other application while building a national system of long-distance, high-speed electric trains. However, there has been a recent announcement of a proposed Chinese maglev train that can attain speeds of 375 miles per hour.

The Hyperloop is a proposed technology that would, in theory, permit passenger trains to travel through large tubes from which all air has been evacuated, and would be even faster than today’s highest-speed trains. Elon Musk has formed a company to develop this virtually frictionless mode of travel, which would have speeds to make it competitive with medium- and even long-distance airplane travel. However, the Hyperloop technology is not yet ready to be applied to real travel situations, and the infrastructure to support it, whether an elevated system or a tunnel, will have all the problems of building conventional high-speed rail on separate guideways, and will also be even more expensive, as a tube has to be constructed as well as the train.

Megaregions need fast enough trains now

Even if new technology someday creates long-distance passenger trains with travel times competitive with airplanes, passenger traffic will still benefit from upgrading rail service to fast-enough trains for many of the trips within a megaregion, now and in the future. States already have the responsibility of financing passenger trains in megaregion rail corridors. Section 209 of the federal Passenger Rail Investment and Improvement Act of 2008 requires states to pay 85 percent of operating costs for all Amtrak routes of less than 750 miles (the legislation exempts the Northeast Corridor) as well as capital maintenance costs of the Amtrak equipment they use, plus support costs for such programs as safety and marketing. 

California’s Caltrans and Capitol Corridor Joint Powers Authority, Connecticut, Indiana, Illinois, Maine’s Northern New England Passenger Rail Authority, Massachusetts, Michigan, Missouri, New York, North Carolina, Oklahoma, Oregon, Pennsylvania, Texas, Vermont, Virginia, Washington, and Wisconsin all have agreements with Amtrak to operate their state corridor services. Amtrak has agreements with the freight railroads that own the tracks, and by law, its operations have priority over freight trains.

At present it appears that upgrading these corridor services to fast-enough trains will also be primarily the responsibility of the states, although they may be able to receive federal grants and loans. The track improvements being financed by the State of Michigan are an example of the way a state can take control over rail service. These tracks will eventually be part of 110-mile-per-hour service between Chicago and Detroit, with commitments from not just Michigan but also Illinois and Indiana. Fast-enough service between Chicago and Detroit could become a major organizer in an evolving megaregion, with stops at key cities along the way, including Kalamazoo, Battle Creek, and Ann Arbor. 

Cooperation among states for faster train service requires formal agreements, in this case, the Midwest Interstate Passenger Rail Compact. The participants are Illinois, Indiana, Kansas, Michigan, Minnesota, Missouri, Nebraska, North Dakota, Ohio, and Wisconsin. There is also an advocacy organization to support the objectives of the compact, the Midwest Interstate Passenger Rail Commission.

States could, in future, reach operating agreements with a private company such as Virgin Trains USA, but the private company would have to negotiate its own agreement with the freight railroads, and also negotiate its own dispatching priorities. Virgin Trains says in its prospectus that it can finance track improvements itself. If the Virgin Trains service in Florida proves to be profitable, it could lead to other private investments in fast-enough trains.

Jonathan Barnett is an emeritus Professor of Practice in City and Regional Planning, and former director of the Urban Design Program, at the University of Pennsylvania. 

This is an extract from “Designing the Megaregion: Meeting Urban Challenges at a New Scale”, published now by Island Press. You can find out more here.