How did the tube lines get their names? A history of London Underground in 12 lines

A very old tube map, at Aldwych in 2004. Image: Getty.

Most cities' metro networks have boring names for their lines: colours or numbers or occasionally letters, simple labels that don’t tell you anything about them.

London’s tube lines, though, have names, and that gives them a degree of personality. What’s more evocative: Line 8, or the Bakerloo? The C train, or the Jubilee? Names are great, right?

Except – the names don’t. Make. Any. Sense. The Circle line isn’t a circle. We call the line that goes further south than any other the Northern line, and the Central line is one of literally all the lines that serve central London. The Victoria line goes to Victoria station, but so do two others, and which District exactly are we talking about here?

So – how did we end up with these obviously nonsensical names? What the hell happened?

Before we get going, I should warn you: I intended this as a quick listicle-style post. It didn’t work out that way, and what follows is more of a long-read on the history of the tube, one line at a time. Sorry about that. If you want to close this article now, I won’t judge you for it.

Still with me? Let’s roll.

Metropolitan line (1863)

Let’s start with an easy one. The Metropolitan Railway was the private company which built the first stretch of underground railway in London, helping commuters from the railway terminals at Paddington, Euston and King’s Cross reach the north west corner of the City at Farringdon Street.

Over the next few decades, the company’s network grew rapidly: reaching Hammersmith in 1864, Richmond in 1877, and joining up with a rival company to close a circle around central London by 1884. It also extended to the north west from a branch at Baker Street, scattering the new suburbs of “Metroland” along its path through Middlesex, into Herts and Bucks. At its greatest extent, the Met made it all the way to Verney Junction, more than 50 miles from Central London and basically in the middle of nowhere even now.

Verney Junction today. That’s the edge of Milton Keynes in the top right corner. Image: Google Maps.

Those outer branches are gone now, and much of the track the company laid is now served by other lines (Circle, District, Piccadilly, Jubilee), or even National Rail (in the form of the Chiltern Railways branch to Aylesbury).

But when the London Passenger Transport board swallowed much of London’s transport network in 1933, it retained the Metropolitan name for the core of the network, running around the north of central London, with branches to Barking, Hammersmith and points north west.

“But,” I hear you cry, “the Metropolitan line doesn’t go to Barking or Hammersmith!” Don’t worry, we’ll be coming back to that.

Harry Beck’s iconic first tube map. The Bakerloo, Piccadilly and (what is now) Northern are “lines”; the rest are still “railways”. Click to expand.

District line (1868)

The first stretch of what is now the District line opened in December 1867 from South Kensington to Westminster. Which was handy if you were a mid Victorian politician with a big house in Belgravia.

The company that built it was actually the Metropolitan District Railway – but since the vaguely parallel line to the north got to the Metropolitan bit of the name first, the new kid on the block became known simply as the District.

Anyway. This one, too, was for many years less of a single line than a network, and its tentacles gradually spread: to West Brompton in the west and Mansion House in the east by 1871; to Ealing, Hounslow and Wimbledon; and along London Tilbury & Southend Railway tracks to Upminster in 1902. In 1884, after the inner circle was completed, the two companies began running joint trains around the network: the Circle line was effectively there, even if nobody would be ready to admit it for another 60 years.


Northern line (1890)

The first section of the Northern Line opened between Stockwell and King William Street in the City in 1890. It was the first proper tube line (that is, a line built by boring a tunnel, rather than by cutting a trench and then sticking a roof on it). It wasn’t the Northern line yet: it was actually built by the City & South London Railway, which, let’s be honest about it, was a much more sensible name.

King William Street was abandoned in the hilariously short time of 10 years, replaced by Bank when the line extended north to Moorgate in 1900. By 1907 further extensions had taken the line to Euston and Clapham Common.

The same year a second company – the Charing Cross, Euston & Hampstead Railway, better known as the Hampstead Tube – ran its first trains from Strand (now Charing Cross) northwards to Golders Green and Highgate.  

The CCE & HR had been established in 1891 as an independent company. But in 1900, it became a subsidiary of the Underground Electric Railways Company of London: the imaginatively-named holding company controlled by the ever so slightly dodgy American financier Charles Tyson Yerkes. The UERL, as it was known, also built the Piccadilly and the Bakerloo, and in 1914 bought up the City & South London, too. In the early 1920s, the company it added some fiddly bits of track at Camden and Kennington, allowing the Hampstead and South London tubes to run as a single network. Further extensions into the suburbs followed.

The growth of the Northern line. Image: Rbrw/Wikimedia Commons.

None of which explains how the whole thing came to be known as the Northern line. Various contractions for the Morden-Edgware route were tried (“Edgmor”, “Mordenware”, “Medgway”, “Edgmorden”), but all of those are obviously awful so none of them stuck.

Hilariously, the name that did stick is a reference to some extensions that never actually happened. In 1935, the London Passenger Transport Board published its New Works scheme, outlining ambitious extensions into the suburbs. A big part of that was the Northern Heights project, which would have joined the Moorgate-Finsbury Park route to lines onwards to Highgate, Alexandra Palace and Bushey Heath. It was all very exciting, except World War Two happened, the money disappeared, and much of the plan was abandoned.

A 1939 tube map showing the New Works project. Click to expand.

The result of this is we ended up with a Northern line which doesn’t include the northernmost parts of the network (the notably un-metropolitan village of Chesham, on the Metropolitan), but does include the southernmost (Morden).

Anyway, if you want to see what’s left of the Northern Heights plan, there’s a rather nice walk along the abandoned line from Finsbury Park to Highgate.

All that remains of Crouch End station, closed 1954. Image: Fezpp/Wikimedia Commons.

Waterloo & City line (1889)

Oh thank god, an easy one.

The London and South Western Railway built its station by Waterloo Bridge in 1848. The new line helpfully delivered passengers from Southampton and Richmond to within a couple of miles of their offices, only to then abandon them to fend for themselves.

By the 1890s, though, this was becoming annoying. So a new company – the Waterloo & City Railway Company; they really put effort into naming things in those days – got parliamentary permission to build a new tube line from Waterloo (as it was now known) to a new City station. The resulting railway opened in 1898, and was named after the company and its two stations.

City was renamed Bank in 1940, when somebody pointed out that having multiple names on single station complexes was stupid. Nobody has yet made the same argument for Monument.

Central line (1890)

The Central London Railway opened in 1900, from Shepherd’s Bush to the new station at Bank (a hive of activity for new railway companies in 1900, you’ll notice). Whether the name was chosen because it ran between the two existing east-west lines, or simply because it was a nifty bit of branding, sadly seems to be one of life’s little mysteries.

Anyway. It remained the Central London line even after integration into the London Transport Passenger Board network in 1933, but by 1937 had been shortened to simply the Central line in 1937.
That’s quite a boring story, though, so let’s talk about the path not taken. The initial plan was to increase the line’s capacity through turning loops at Shepherds Bush and its new eastern terminus at Liverpool Street: trains would have continued out of the station at one platform, done a quick spin and returned to the other before heading out again. (Some Northern line trains still do this at Kennington.) More excitingly, there were proposals for this magnificent loop line:

Image: Ed g2s/David Cane/Wikimedia Commons.

In the event of course it didn’t do either, but we did get extensions to the eastern and western suburbs. There’s even a loop of sorts from Leytonstone through Gants Hill, Hainult and Woodford back to Leytonstone. So that’s nice.

Bakerloo line (1906)

We all know where this one came from, right? The Baker Street & Waterloo Railway – another UERL subsidiary – opened its new line between Baker Street and Kennington Road (today’s Lambeth North) in March 1906. The abbreviated name caught on so quickly that the line’s official name was changed to the Bakerloo the following July, a mere four months after opening day.

Extra branches to the north appeared in the following decades. The first was to Queen’s Park, where it joined the London & North Western Railway’s suburban line to Watford. Another took over the Stanmore branch of the Metropolitan line in 1939, to simplify the massively over-complicated Metropolitan line.

Since then, of course, the Watford service has been cut back to Harrow & Wealdstone, while the Stanmore one has switched lines. And the various proposed southern extensions have never appeared at all: the line still terminates at Elephant & Castle, as it has since August 1906. If we’re lucky, though, that should change within the next 20 years or so.


Piccadilly line (1906)

Big year for new tubes, 1906: that December, the Great Northern, Piccadilly & Brompton Railway (GNP&BR), yet another UERL subsidiary, opened a new line from Finsbury Park to Hammersmith. The name reflects the fact that it ran from the Great Northern station in Finsbury Park, through central London, under Piccadilly, to Brompton and points west.

This looks like a relatively smooth one from a modern perspective: rather than opening in bits, the entire central London section of the modern line appeared in one go. Actually, though, it was the result of two earlier schemes – the Great Northern & Strand route from Finsbury Park to Aldwych, and the Brompton & Piccadilly Circus one from the west to Piccadilly – stitched together, with a connection between them under the West End.

What titan of the tube managed to bring these two proposals together, I hear you ask? That’d be Charles Tyson Yerkes, the American financier who founded UERL in 1902. His company, you’ll have noticed, if you’ve been paying attention, managed to build three separate lines; it also acquired and electrified the District. He probably had more impact on the tube than any other individual.

The lines that Yerkes built, as of 1907. Image: David Cane/Wikimedia Commons.

Yerkes, though, never lived to see the network he did so much to build: he died in 1905, when only one of his proposed routes (the Hampstead) existed. Pity, in some ways: correlation isn’t causation, but it is notable that his death comes at almost exactly the point when private companies stopped digging major new tube lines under central London. After the Piccadilly, it would be sixty years before the next appeared, and that would be the work of the public sector.

Before we get to that, though, a brief interlude:

Circle line (1949)

The Circle line was actually finished in the 1880s, but only became a separate line on the map in 1949. It was called the Circle line because, well, it was a circle – or rather a loop, since it’s much longer east-west than it is north-south, and the western end is noticeably fatter than the eastern.

It stayed a circle until 2009, when TfL decided to break it: since then trains have started at Edgware Road, travelled anti-clockwise around central London, passed Edward Road again and continued onto Hammersmith.

This had the advantage of adding extra trains on the Hammersmith branch. It also removed a flat junction (that is, where trains cross each other’s paths) at Edgware Road, thus allowing higher frequency services. But it’s not been popular with everyone and the 2010 UKIP manifesto promised to turn it back again.

Definitely not a circle: a geographically accurate map of the Circle line. Image: Wikimedia Commons.

Anyway – UKIP didn’t win the 2010 general election, for some reason, so the Circle line remains a spiral, or possibly a teacup.

Victoria line (1968)

The passing of Charles Tyson Yerkes marked the end of the great era of the swashbuckling speculative railway magnate. Over the next few decades, various proposals for new lines through central London didn’t come off, and the network’s expansion focused instead on the suburbs – often, indeed, created those suburbs as it went. (There was also the matter of two world wars to contend with, which was a bit of a distraction on the whole.) 

Anyway: after World War II, everything changed. In 1948, the London Passenger Transport Board was nationalised as the London Transport Executive: for the first time, planning and building new tube lines would be the job of the state. What’s more, the city had stopped growing, thanks to the metropolitan green belt (indeed, its population was actually falling). So, when the authorities came to plan the first new central London tube line in half a century, its main function would not be to serve new destinations: rather, it was intended to relieve over-crowding on the existing network.


And so, in 1948, the agency in charge of the newly nationalised-transport network, the British Transport Commission – the London Transport Executive’s Dad, basically – proposed a new south-west to north-east line, running from Victoria to Walthamstow. The plan won parliamentary permission in 1955, construction began in 1962, and the first trains ran in September 1968. By that point, proposals for a southern extension to Brixton had already been approved; that bit opened in 1972.

In other words, it now took nearly a quarter of a century to build a new tube line. This was exactly the kind of breakneck scheduling that would later give us Crossrail.

But what of its name? During planning the line was known as Route 8 or Route C (references, one assumes, to long forgotten consultation documents), but those would obviously never have survived contact with the Tube Map. There were attempts to name it the Walvic line (Walthamstow-Victoria) or, more pleasingly, the Viking line (Victoria-King’s Cross). 

Despite the fact that this latter name is brilliant, the authorities decided to be boring as hell and name it the Victoria line: this was presumably to advertise the fact that its main function was to improve links between Victoria station and the West End. And so, half a century on, we can do nothing but mourn the loss of the Viking line.

Jubilee line (1979)

The Jubbly, too, was created to relieve the existing network. In fact, it did so before it was even conceived as a new line: it started life in 1939, when the London Passenger Transport Board extended the Bakerloo line through a new tunnel from Baker Street to Finchley Road; beyond that, it took over Metropolitan line services to Stanmore, thus relieving pressure on Baker Street. 

After the war, various official sounding bodies proposed all sorts of ideas to expand the central London network, and with south-west to north-east travel dealt with by the Victoria line, north-west to south-east was next on the list. 

The original plan, discussed in the mid 1960s, would have seen the Stanmore branch connected to a new line, via Bond Street and Charing Cross; it would then continue under the Strand and Fleet Street to Cannon Street and Fenchurch Street, before heading on to pathetically under tube-d south east London. This line, in reference one of the key streets in served, and the buried river after which it was named, would be known as the Fleet Line. 

Various proposals for the Fleet Line, dating from the mid 1970s. Image: London Reconnections/public domain.

Except, everything went wrong. Construction began in 1971, even as the Victoria line was being polished off – but the various fiscal crises of that decade meant that the government decided to build it in stages, with the first stage only running as far as Charing Cross. Since the new line didn’t actually make it as far as Fleet Street, and since sucking up to royalty was all the rage, the proposed name was abandoned. The line instead opened as the Jubilee Line, coloured silver on the map, to reference the fact that 1977 was the queen’s Silver Jubilee.

Which would make sense were it not for the fact that it didn’t actually open until 1979. 

Anyway. It was another 11 years before plans to extend the line were finally agreed, and by 1990, London’s economic geography had changed. Improving links in the City and connecting up south east London were now less of a priority than serving the South Bank and Canary Wharf. So when the extension finally opened in 1999, it never went near Fleet Street at all. Perhaps they got the name right after all.

Hammersmith & City line (1990)

This, like the Circle, is actually one of the oldest bits of the network, but for most of its history it was just a part of the Metropolitan line.

That line was always a bit over-complicated, however, and eventually someone noticed that – since all the Metropolitan line’s Hammersmith trains went to Barking, and since all its Barking trains went to Hammersmith – it really might as well be shown as a separate line. The Hammersmith & City made its first appearance on the tube map in its own salmon pink in 1990.

There doesn’t seem to be an interesting story behind the name. Presumably they wanted to highlight that this was the Hammersmith branch, but it was nonetheless a pretty lazy choice of name for a line that runs from Hammersmith to the City, not least since the District line runs from Hammersmith to the City as well. Oh, and unlike the Waterloo & City line, it doesn’t even have the excuse of serving a station once known as City.

Ah well. Not everyone can be creative, I suppose.

Elizabeth line (2019)

Oh, for heaven's sake. Image: Getty.

And so we reach the end of our journey, a line that’s named after the Queen. Or rather, another line that’s named after the bloody Queen, because apparently having one line named after an event in her life, and another after her great great grandmother, wasn’t good enough for her. So instead of Crossrail, the Elizabeth line it will be, even though she’s still alive, because naming transport infrastructure after people who are still breathing in and out is definitely not a creepy thing to do. 

I can’t help but notice that this is the third time running this has happened. Victoria, not Viking; Jubilee, not Fleet; now Elizabeth, not Crossrail. Since the integration of the tube network under the London Passenger Transport Board in 1933, the city authorities have succeeded in creating precisely no new major underground railways without naming them after the royal family. 

And this is why we will never have true equality in Britain.

This bloody country. 

Jonn Elledge is the editor of CityMetric. He is on Twitter as @jonnelledge and also has a Facebook page now for some reason.

Want more of this stuff? Follow CityMetric on Twitter or Facebook.

 
 
 
 

Network Rail let me have a play on Manchester’s new rail bridge. Here’s what I learned

The new bridge in all its glory. Image: Network Rail.

By the time the railways arrived in Manchester, the city was already built up, forcing trains to finish their journey on the edge of the urban area. To this day, it still has two main stations: Victoria, which sits on the northern edge of the city centre, and serves destinations across the north; and Piccadilly, which serves a smaller chunk of the north, but also provides trains to Birmingham, London and points south.

There are many ways in which this situation is less than ideal. For a start it means that travellers get off a train, only to find they’re still surprisingly far from the city centre. For another, terminating services take up more space (because you need more platforms) and time (because crews need to change ends) than through ones.

Then there’s Manchester Airport, the busiest in the north, used by travellers right across the region. But that’s to the south of the city, on a line into Piccadilly, which makes it annoyingly hard to get to by train.

The proposed PiccVic tunnel. Image: Wikimedia Commons.

So what with one thing and another, linking up Manchester’s two stations in some way has been an ambition for decades. In the mid-1970s, there was a plan for a “Picc-Vic” tunnel, which would have served five underground stations in the city centre – but that, inevitably, got cancelled due to lack of funds. The city council instead started to focus its efforts on the new Metrolink tram network; but while that’s been great for locals and commuters, it’s not done much for longer-distance travellers

A few weeks from today, though, trains will travel directly between Piccadilly and Victoria for the first time. To do so, they’ll use existing lines to the south and west of the city centre, as well as 300m of new track, known as the Ordsall Chord.

And, for reasons that aren’t exactly clear, the nice people at Network Rail let me have a go on their new bridge. Here I am, in my fetching new personal protective equipment:

Jacket, trousers, boots, gloves, eye protection, hard hat: all present and correct. Ability to take a remotely flattering selfie: conspicuous by its absence. Image: author provided.

(The trousers were my size, which was unexpected, because I hadn’t actually told Network Rail what size I was. This lead me to worry they kept a database of such things, but the press office assured me that this had literally never happened before, and was extremely unlikely to happen again. So anyway.)

The Ordsall Chord has been talked about for a very long time: parliament actually agreed to build the thing, then known as the Castlefield Curve, all the way back in 1979, just after the cancellation of the Picc-Vic tunnel. In some ways it’s an obvious missing link – remember we’re talking about just 300m of new track, costing under £100m, which isn’t that much as these things go. But Britain being what it is, it proved rather easier to persuade ministers to build London’s £15bn Crossrail instead.

A schematic of the new curve. Image: Wikimedia Commons.

In 2011, though, then chancellor George Osborne unexpectedly announced £85m of funding. The project somehow survived austerity and the new bridge in the borderlands between Manchester and Salford, officially opened last week (although the first trains won’t run until next month).

A scale model of the new link, nearby in what was Manchester Liverpool Road station; it’s now a part of the Museum of Science & Industry. Image: author provided.

I say it’s a bridge: as it happens, it’s actually two bridges. The bit your eye is drawn to is a structure known as a “network arch”, which means those wires crosses at least two others. That part will carry trains over the River Irwell, which divides Manchester from Salford.

Beyond that, though, there’s a second bridge: a flat one, across a section of the inner ring road. Linking them is a slight dip in the metal sides of the bridge (though not, obviously, in the track).

A map of the area. New curve highlighted in yellow. Image: Google.

This, along with the asymmetrical shape of the arch which facilities it, is a purely aesthetic feature. So is the colour: the metal was allowed to rust in the Manchester climate, apparently for no other reason than to make it look cool. “We don’t want it to read as different structures as you look along the river,” Peter Jenkins, the head of transport at architects BDP and lead architect on the project, explained at the official opening ceremony. The design, he added, was “not uncharted, but rarely charted.”

To be fair, it is a great looking bridge: something that looks like a landmark, rather than just a piece of infrastructure. One of the guys who’d worked on the project told me, as a group of us stood on the bridge, that he hoped it would be illuminated at night, just to show it off and make it a feature of the city’s skyline.

(Incidentally, as excited as I was to go play on the bridge, it wasn’t entirely clear what I was meant to do once I got there. I tramped up and down a bit, took some pictures of the city’s skyline, and occasionally checked nervously that there was no way a train could get near me. But what was I actually meant to do? And what was a decent interval before it was acceptable to, y’know, get off the bridge again? Ah well, better take another photo I suppose.)

A view from a bridge. Image: author provided.

Looking good is all very well, of course, but what will the Ordsall Chord actually do? 


For a start, it’ll allow travellers from Yorkshire, the north east and other parts of the north to travel directly to the airport for the first time: that should hopefully work out well the airport, the road network and the wider economy.

It’ll also speed up journey times. Longer distance services will no longer have to reverse, or trundle all the way around Manchester on far-flung bits of track. Instead, they’ll be able to go straight around the city centre.

(Seriously, I’ve been up here 20 minutes now. Is it okay to get down again yet? Surely they must all have noticed that I have no idea what I’m doing right now. Surely.)

Mike Heywood, the director who managed the project for Network Rail, pointed me to another, less obvious benefit. At the moment, the various trains terminating at Piccadilly often have to cross each other’s paths to reach their platforms. This, if you don’t want trains to crash into each other, limits the number of trains you can actually run.

By diverting a share of trains via two new through-platforms and the chord, Heywood told me, you can reduce that, and add 25 per cent to Piccadilly’s capacity at a stroke.

The side view. Image: author provided.

Oh, and by making the new bridge look good, those who built it also hope it’ll help kick-start regeneration along a rather neglected stretch of the River Irwell, too.  Not bad for 300m of new track.

This is only one part of what the industry has termed the Great North Rail project. Others include an extra platform at Manchester Airport, electrification on assorted routes in the north west, and – best of all, given the state of the existing rolling stock – vast numbers of new trains, due to appear next year.


 The region’s transport network is still not getting anything like the care or attention that we take for granted in the south east, of course, but all the same, it’s nice to be able to write about a new railway line in the north for once. AND they let me go play on a bridge.

Jonn Elledge is the editor of CityMetric. He is on Twitter as @jonnelledge and also has a Facebook page now for some reason. 

Want more of this stuff? Follow CityMetric on Twitter or Facebook